You can now have comfortable warm showers on the go, thanks to the Gasmate WaterTech Portable Hot Water system. All you need is a LPG bottle, 12V DC power source & 2 ‘D’ cell batteries and you are set to go. It is easy to assemble and can heat up to 3 Litres per minute at your preferred temperature with adjustable Water Flow & Burner Performance. 

The water outlet temperature is conveniently displayed on the LED panel. Initial water output temperature will vary depending on the water input temperature. A second cycling of the water through the unit maybe required if the incoming water temperature is very low to achieve the desired water output temperature.

All hoses, fittings and the shower head with flow control are included so all you need to do is attach to your gas cylinder, find a water source and you’ll be having a comfortable shower in no time - you’ll wonder how you ever went bush without one!

The Gasmate Watertech Hot Water System is the perfect campsite shower and is loaded with features.

NB: This unit is not designed for daily domestic home use, for off grid use or use in semi-permanent living situations.

Gasmate Watertech Hot Water System Features:

• Adjustable Temperature and Water Flow settings
• Handheld Shower Head with ON / Off Function
• Quick Connect Water and Gas fitting
• Submersible DC Water Pump
• Automatic ignition starts when tap is turned on, stops when tap is turned off
• LED temperature display screen
• Multi-season mode
• Low water pressure on start up
• Hanging/mounting hook
• Flame failure system (gas will shut off if flame goes out)
• Low pressure safety system
• Steel housing with enamel finish
• Approved to NZ Gas Standards
• Includes water heater, shower head, silicone water hoses, filter and pump, and gas hose and regulator

Gasmate Watertech Hot Water System Specifications:

Ignition: Automatic (Battery operated so no mains power needed)
Max Water Output Temperature: 45-50 °C
Average Water Output Temperature: 30-35 °C above incoming ambient water temperature
Water Output: 3 litres/min
Consumption: 28MJ/hr
Fuel type: ULPG
Weight: 5.2 kg
Dimensions: 290 W x 140 D x 400 H mm

Heads Up: If the ambient water temperature of water coming into the unit is very low, the average water output temperature will also be low. Because of this, you may need to cycle the water through the unit more than once to achieve the optimum water output temperature.

NB: Unit must only be operated with the pump supplied and never connected to a mains pressure water supply.
NB: WaterTech Shower Stand shown is sold separately.

NB: This unit is not designed for daily domestic home use, for off grid use or use in semi-permanent living situations.